Skip to content
Buying guideNovember 10, 20264 min read

The 3D configurator: how to design your table to the millimetre

In the 3D configurator you pick top material, colour, shape, millimetre size and frame while the 3D model and price update live.

Ceramic dining table on a black steel cross frame designed in the 3D configurator

In the 3D configurator you put together a dining or garden table the way your room asks for: top material, colour, shape, exact size and frame. With every choice the 3D model updates in front of you and the price recalculates live, down to the millimetre.

Quick guide

  • Unsure about the top material? Start from daily use: carefree indoor and outdoor use points to ceramic; warmth and timber grain point to oak or walnut.
  • Unsure about size? Measure your room first: allow 700 to 750 mm per person and at least 900 mm of walkway around the table.
  • Unsure about colour? Order material samples to check against your floor and daylight before ordering.

What the configurator does

The 3D table configurator runs directly in your browser on phone, tablet and desktop with nothing to install. You rotate and tilt the table with your finger or mouse to inspect leg clearance, overhang and edge profile from every angle while the price updates immediately.

Your choices, step by step

Table top material

  • Ceramic: resists heat (including a hot pan straight from the hob), scratches and stains, 12 or 20 mm thick, indoors and outdoors. Drawback: heavy, and the edge is sensitive to a hard knock.
  • Granite: natural stone, 30 mm thick, indoors and outdoors. Not heat-resistant; seal after delivery and every 2 to 3 years.
  • Oak: 40 mm solid European oak, honey to golden brown, indoor use only.
  • Walnut: 40 mm solid walnut, deep chocolate brown, indoor use only.

Colour or finish

Options follow your chosen material. Ceramic comes in 29 colours. Granite offers four varieties: Steel Grey leather, Coffee Brown leather, Tan Brown polished and Nero Assoluto honed. Oak is stained in your chosen shade and protected with two coats of clear matt lacquer; if you choose untreated, you finish the timber yourself.

Shape

Rectangle, rectangle with rounded corners, round, oval, Danish oval or half circle. For help matching shape to room layout, read choosing a made-to-measure dining table.

Size to the millimetre

You set length and width (or diameter on a round top) to the millimetre. The configurator automatically guards the structural limits of each slab: oak up to 3000 × 1200 mm, walnut up to 2600 × 1200 mm and granite up to 2400 × 1000 mm. Our standard dining table height is 760 mm.

Frame: material, model and colour

Choose steel or stainless steel. Both can stand outdoors; on steel, deep damage to the coating can rust.

  • Steel: welded in our workshop in Maasbree, powder-coated in a fine texture across 10 standard colours.
  • Stainless steel: brushed grade 304, or optionally powder-coated in a RAL colour.

Base models carry city names such as Amsterdam, Geneve, Praag and Riga. The 3D view places each base directly under your exact slab dimensions so you see the true proportions.

Indoors or outdoors

When you switch to outdoor use, a steel frame automatically gets an extra primer coat underneath the powder coating, and indoor-only woods (oak and walnut) are filtered out.

Sharing, ordering and delivery

  • Share: send your configuration as a link to your partner or family; opening the link loads the exact same table in 3D.
  • Order: add your configured table straight to the basket without waiting for a quote.
  • Delivery: delivered within 4 weeks, or at a lower rate within 8 weeks. Collection in Maasbree is also possible.

Every table carries a 2-year guarantee on construction and finish. Because made-to-measure tables are built to your specification, they are excluded from the statutory right of withdrawal, so double-check your room measurements before ordering.

See and feel first

A screen never reproduces stone veining or wood grain completely. Order material samples of ceramic, oak or walnut, or visit our showroom in Maasbree, the Netherlands (also open on Saturdays). Need only a base? Browse table bases.

Frequently asked questions

Do I need to install anything to use the 3D configurator?

No. The configurator runs directly in the browser on your phone, tablet or computer.

Is the price shown in the configurator final?

Yes. The price is calculated live from your exact material, millimetre size, shape and frame choices; delivery options are shown at checkout.

Can I share my 3D table design?

Yes. You can copy a link to your design; anyone who opens it sees the same table in 3D.

How accurately can I set the dimensions?

Down to the millimetre, within the slab limits of your chosen material.

Can I view material samples before ordering?

Yes. Order material samples of ceramic, oak or walnut to inspect in your own light at home.

Inspired?

View our collection or contact us for personal advice.